Addonics Technologies AEDMDISU2 User Manual

User Guide

Internal IDE/SATA/USB

DigiDrive (AEDMDISU2)

T E C H N O L O G I E S

4-Pin Floppy

Power Port

SATA 1.5Gbs

Data Port

Mode Jumper JP4

(Close or Open)

Pin 1

USB 5-Pin Header

Drive Activity LED

4-Pin Floppy Power Connector

4 slots - CF, SD, MMC, MiniSD, SM,

xD, MS, MS Duo and MS Pro Duo

SATA Port 2 (Slave)

SATA Port 1 (Master)

Standard 40-Pin IDE Interface for Mounting

Directly onto Motherboard IDE Channel

Mode Jumper (JP4):

Note: Only applies on SATA connection

The internal SATA / USB DigiDrive supports Type I, II CF Cards, CF Micro drive, SD, SDHC, miniSD

(with adapter), Trans flash, SD HS (Secure Digital High Speed), MMC Cards (4-bit and 8-bit modes),

RS-MMC, MMC-Micro, MMC Plus, Smart Media, xD picture card- both H and M types, Memory

stick, Memory stick PRO, MS Extreme III Type media, MS PRO, HS (4-bit mode).

v7.1.11

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212